<?xml version="1.0" encoding="utf-8"?>
<rss version="2.0">
  <channel>
    <title>化工工程论坛 - 电气专业</title>
    <link>http://www.hggc.net/forum.php?mod=forumdisplay&amp;fid=38</link>
    <description>Latest 20 threads of 电气专业</description>
    <copyright>Copyright(C) 化工工程论坛</copyright>
    <generator>Discuz! Board by Comsenz Inc.</generator>
    <lastBuildDate>Wed, 13 May 2026 10:12:16 +0000</lastBuildDate>
    <ttl>60</ttl>
    <image>
      <url>http://www.hggc.net/static/image/common/logo_88_31.gif</url>
      <title>化工工程论坛</title>
      <link>http://www.hggc.net/</link>
    </image>
    <item>
      <title>变电所平剖面图的绘制</title>
      <link>http://www.hggc.net/forum.php?mod=viewthread&amp;tid=2608</link>
      <description><![CDATA[1 绘制变电所平剖面图的有关资料1.1 变电所建构筑物平面图及剖面图。1.2 电气专业基础工程设计资料1.2.1 取得已选定的高低压开关柜和变压器等变配电设备的样本及详细设计资料。1.2.2 变电所平剖面布置图。1.3 高低压供电系统图。2 绘制变电所平面布置图的步骤2.1 绘制变 ...]]></description>
      <category>电气专业</category>
      <author>admin</author>
      <pubDate>Sat, 02 May 2026 03:21:25 +0000</pubDate>
    </item>
    <item>
      <title>变电所电缆桥架布置图的绘制程序(二）</title>
      <link>http://www.hggc.net/forum.php?mod=viewthread&amp;tid=2122</link>
      <description><![CDATA[绘制变电所电缆桥架布置图的步骤

1 图幅的确定: 变电所电缆桥架布置图一般选用A1图纸。图幅大小可按变电所大小根据公司标准图幅做适当调整。2 在确定的A1图幅上按1:100的比例采用0.25mm宽的线型绘制出变电所的电缆夹层或电缆沟平面图, 并标注有关轴线及相关尺寸, 并在A ...]]></description>
      <category>电气专业</category>
      <author>admin</author>
      <pubDate>Sat, 11 Oct 2025 02:57:21 +0000</pubDate>
    </item>
    <item>
      <title>变电所电缆桥架布置图的绘制程序(一）</title>
      <link>http://www.hggc.net/forum.php?mod=viewthread&amp;tid=2121</link>
      <description><![CDATA[绘制变电所电缆桥架布置图的有关资料1 变电所建筑图，包括平面及剖面图。2 电气专业基础工程设计资料,取得选定电缆及电缆桥架的样本及详细设计资料。3 变电所平剖面图。4 变电所电缆敷设图。5 电缆表。
 ...]]></description>
      <category>电气专业</category>
      <author>admin</author>
      <pubDate>Sat, 11 Oct 2025 02:56:11 +0000</pubDate>
    </item>
    <item>
      <title>6kV系统图绘制(二）</title>
      <link>http://www.hggc.net/forum.php?mod=viewthread&amp;tid=1982</link>
      <description><![CDATA[1.3依照《 电力设计技术规范》有关条款对高压开关柜内的高压电器进行核对和选择：1.3.1根据高压开关柜的样本及高压电器元件的详细资料，核对所选的电器元件额定工作电压应与所在回路的标称电压相适应；1.3.2选择各回路电器元件的额定电流不应小于所在回路的计算电流；其 ...]]></description>
      <category>电气专业</category>
      <author>admin</author>
      <pubDate>Tue, 12 Aug 2025 01:58:19 +0000</pubDate>
    </item>
    <item>
      <title>6kV系统图绘制(一）</title>
      <link>http://www.hggc.net/forum.php?mod=viewthread&amp;tid=1981</link>
      <description><![CDATA[1 准备有关资料：1.1 6kV工艺设备用电条件表及本变电所供电范围内所需6kV电源条件；1.2 电气专业基础工程设计中有关资料：1.2.1 短路电流计算结果； 1.2.2单线系统图：确定高压系统接线方式；1.2.3逻辑图：确定高压开关柜进线、母联及各馈线回路的控制电路及各相关的继 ...]]></description>
      <category>电气专业</category>
      <author>admin</author>
      <pubDate>Tue, 12 Aug 2025 01:56:22 +0000</pubDate>
    </item>
    <item>
      <title>变配用电设备电气试验与典型故障分析及处理</title>
      <link>http://www.hggc.net/forum.php?mod=viewthread&amp;tid=1349</link>
      <description><![CDATA[变配用电设备电气试验与典型故障分析及处理

2012年机械工业出版社出版的图书
《变配用电设备电气试验与典型故障分析及处理》是2012年机械工业出版社出版的图书，作者是赵永生。
中文名变配用电设备电气试验与典型故障分析及处理
作    者赵永生
出版社机械工业出版社
 ...]]></description>
      <category>电气专业</category>
      <author>3088</author>
      <pubDate>Fri, 11 Apr 2025 14:24:12 +0000</pubDate>
    </item>
    <item>
      <title>6kV系统图绘制程序（二）</title>
      <link>http://www.hggc.net/forum.php?mod=viewthread&amp;tid=964</link>
      <description><![CDATA[1.3 依照《 石油化工企业生产装置电力设计技术规范》（SHJ38-91）第五章第四节‘6-10kV主要电器的选择’有关条款对高压开关柜内的高压电器进行核对和选择：1.3.1根据高压开关柜的样本及高压电器元件的详细资料，核对所选的电器元件额定工作电压应与所在回路的标称电压相 ...]]></description>
      <category>电气专业</category>
      <author>admin</author>
      <pubDate>Wed, 05 Feb 2025 06:41:42 +0000</pubDate>
    </item>
    <item>
      <title>6kV系统图绘制程序（一）</title>
      <link>http://www.hggc.net/forum.php?mod=viewthread&amp;tid=963</link>
      <description><![CDATA[1 准备有关资料：1.1 6kV工艺设备用电条件表及本变电所供电范围内所需6kV电源条件；1.2 电气专业基础工程设计中有关资料：1.2.1 短路电流计算结果； 1.2.2单线系统图：确定高压系统接线方式；1.2.3逻辑图：确定高压开关柜进线、母联及各馈线回路的控制电路及各相关的继 ...]]></description>
      <category>电气专业</category>
      <author>admin</author>
      <pubDate>Wed, 05 Feb 2025 06:40:34 +0000</pubDate>
    </item>
    <item>
      <title>配电平面图绘制</title>
      <link>http://www.hggc.net/forum.php?mod=viewthread&amp;tid=717</link>
      <description><![CDATA[准备有关资料
1 用电负荷条件表
2 设备布置图
3 土建条件图
4 现场控制盘的制造厂资料
5 电缆桥架走向布置图
6 照明系统图
7 照明箱布置图






[/td][/tr]

[/table]]]></description>
      <category>电气专业</category>
      <author>admin</author>
      <pubDate>Thu, 28 Nov 2024 03:35:12 +0000</pubDate>
    </item>
    <item>
      <title>照明工程（二）</title>
      <link>http://www.hggc.net/forum.php?mod=viewthread&amp;tid=575</link>
      <description><![CDATA[照明工程设计的内容、步骤1 设计原始资料的搜集2 照明方式的选择3 照明光源的选择4 照明灯具的选择5 灯具的布置6 照度计算，光源功率及灯具数量的确定
免责声明：所载内容来源互联网等公开渠道，文中内容，仅供参考，交流之目的。转载的稿件版权归原作者和机构所有，如 ...]]></description>
      <category>电气专业</category>
      <author>admin</author>
      <pubDate>Fri, 18 Oct 2024 01:48:58 +0000</pubDate>
    </item>
    <item>
      <title>照明工程（一）</title>
      <link>http://www.hggc.net/forum.php?mod=viewthread&amp;tid=440</link>
      <description><![CDATA[设计原则：
照明设计应根据工艺要求所规定的照度，采用高光效，节能灯具，考虑减少眩光，合理选用光源，创造良好的视觉条件。
在石油化工企业的爆炸危险、火灾、腐蚀场所，还必须采用相应的防护灯具，以保证人身和财产的安全。






免责声明：所载内容来源互联网等公 ...]]></description>
      <category>电气专业</category>
      <author>admin</author>
      <pubDate>Wed, 04 Sep 2024 06:53:50 +0000</pubDate>
    </item>
    <item>
      <title>电缆工程</title>
      <link>http://www.hggc.net/forum.php?mod=viewthread&amp;tid=291</link>
      <description><![CDATA[2.1 电线、电缆芯线材质    2.1.1 控制电缆、耐火电缆应采用铜芯。    2.1.2 电机励磁、重要电源、移动式电气设备的供电回路应采用铜芯。    2.1.3 在振动剧烈、有爆炸危险或对铝有腐蚀(例如：碱....)等严酷的工作环境敷设的配电、照明线路应采用铜芯。    2.1.4 紧靠高 ...]]></description>
      <category>电气专业</category>
      <author>engineer</author>
      <pubDate>Fri, 12 Jul 2024 00:59:29 +0000</pubDate>
    </item>
    <item>
      <title>电气专业基础工程设计规定 负荷计算</title>
      <link>http://www.hggc.net/forum.php?mod=viewthread&amp;tid=230</link>
      <description><![CDATA[2.1 基本原则     2.1.1 设备容量计算     2.1.1.1 连续运行的设备应予计算     2.1.1.2 经常而间断运行的设备应予计算     2.1.1.3 备用及检修时使用的设备不予计算     2.1.2 变、配电所高压侧负荷计算应计及下列内容     2.1.2.1 高压电动机及配电变压器低压侧计算 ...]]></description>
      <category>电气专业</category>
      <author>admin</author>
      <pubDate>Tue, 18 Jun 2024 01:41:49 +0000</pubDate>
    </item>
    <item>
      <title>详细设计阶段</title>
      <link>http://www.hggc.net/forum.php?mod=viewthread&amp;tid=187</link>
      <description><![CDATA[1 石油化工工厂或装置的详细设计应根据基础设计审核会的会议纪要(或批准的初步设计)进行工作;2 按会议纪要(或初步设计审批意见)修正供电方案及相应布置；3 补充或修正电气设备规格书内容和数据表;4 参加制造厂商的技术交流会, 配合采购部门对制造厂报价评标;5 按详细设 ...]]></description>
      <category>电气专业</category>
      <author>engineer</author>
      <pubDate>Tue, 11 Jun 2024 03:10:57 +0000</pubDate>
    </item>
    <item>
      <title>基础设计阶段</title>
      <link>http://www.hggc.net/forum.php?mod=viewthread&amp;tid=138</link>
      <description><![CDATA[1 石油化工工厂或装置的基础设计，根据批准的可行性研究报告和设计合同，进行工作；2 根据合同确定厂区或装置区内电气专业的设计范围；3 编制工程电气专业设计规定;4 根据供电部门提供的电源的电气参数和生产需要电力负荷容量进行电力计算, 确定供电方案; 5 会同其它专 ...]]></description>
      <category>电气专业</category>
      <author>engineer</author>
      <pubDate>Fri, 17 May 2024 05:19:36 +0000</pubDate>
    </item>
    <item>
      <title>各设计阶段的主要任务</title>
      <link>http://www.hggc.net/forum.php?mod=viewthread&amp;tid=137</link>
      <description><![CDATA[可行性研究阶段    1 参加建厂地区的现场踏勘与选厂工作。2 协助建设单位收集建厂地区电源资料。3 核查和整理建设单位提供的有关建厂地区电气设计所需的气象、地质 、水文等基础资料。4 了解地区电气修理的外部协作条件。5 按以下要求编制可行性研究报告: 5.1 论证电源 ...]]></description>
      <category>电气专业</category>
      <author>engineer</author>
      <pubDate>Fri, 17 May 2024 05:18:27 +0000</pubDate>
    </item>
    <item>
      <title>电气专业职责</title>
      <link>http://www.hggc.net/forum.php?mod=viewthread&amp;tid=37</link>
      <description><![CDATA[石油化工工艺系统专业和其它专业提出的用电条件及有关的电气设计条件,电气专业负责石油化工工厂或装置的供电配电及相应的控制和继电保护、照明、防雷保护等项目的电气设施、设备和材料的选择、配置、安装的设计等工作。
 ...]]></description>
      <category>电气专业</category>
      <author>admin</author>
      <pubDate>Thu, 11 Apr 2024 03:11:23 +0000</pubDate>
    </item>
  </channel>
</rss>